Size: 126mm x 14mm（ length x diameter)
Battery: built-in 650mAh
Charging time:2 hours
FROZEN E.T. is packaged in a black paper gift box with a black tote bag and a minimalist design on the front. Only the brand logo is printed.
The product usage guide is printed on the protective film in the package, which allows users to understand the usage method and precautions before using the product, especially for those who are using e-cigarettes for the first time
Because the pod cartridges use a fixed air intake design, in order to facilitate the user to adjust the puff resistance according to their habits, FROZEN E.T. also comes with a sticker that can be attached to the air inlet to adjust the air intake.
FROZEN E.T. uses the same structural design as the heat not burn tobacco heating kits like iqos. A non-slip heat shield is on the top, and a battery device with a USB charging interface is at the bottom. The middle can be rotated and split.
The battery device and the pod cartridge are connected by magnetic attraction, the buckle is fixed, and two electrodes transmit the current.
The cartridge has a sealing sleeve at the mouthpiece and a sealing plug at the bottom interface. Before use, remove these two sealing parts.
FROZEN ET's cartridge uses a one-time closed design. The e-liquid is thrown out after it is used up. It cannot be refilled repeatedly. Align the bayonet when installing and removing. Rely on magnetic force. Non-threaded design. Do not rotate it hard to avoid damaging the equipment.
There are two air holes at the connection between the battery rod and the cartridge. Users can close one of them with the attached sticker to adjust the absorption resistance and taste.
The two eyes of the ET image at the bottom of the battery device are cleverly designed as LED indicators, which will light up during use and charging, and will flash to remind the user when the battery is low.
FROZEN E.T also comes with a beautiful leather case and lanyard, which is convenient for users to carry and use on a daily basis. It also greatly adds value to the product.
1.Unplug the two rubber sleeves on the pod cartridge
2.Rotate left and right and put in the pod cartridge
3. Put the pod cartridge on the cover, turn clockwise to tighten
4. The pod can be used directly after installation
5. For a rich taste, just close one air hole, not two
6. After using a cartridge, use a cotton swab or paper towel to clean the cold liquid
Packages:1 x Frozen E.T. SE Slim Prefilled Device
1 x USB Charging Cable
1 x User Manual
Please check the guarantee policy.
Please contact us first before you leave a review, we will help you to deal with your problem In time
No posts found