MAG P3 Kit by SMOK（without batteries） is powered by dual 18650 batteries and a smart IQ-S Chipset, it can fire up to 230W max output with 0.001s flash firing speed.
It features a special appearance that looks like a gun handle. With its special shape and ergonomic design, the mag mod is very comfortable to hold in hand.
The TFV16 Tank features the 9ml largest E-juice capacity.
With the locking press button on the top cap, it can prevent the E-juice leakage if accidentally opening the top cap.
The airflow system design will bring you a pure vaping experience.
It adopts a newly designed 1.9'' highly-responsive touch screen.
Most of the operations can be finished with a simple touch and it can show you specific vape data in a clear way.
It can offer more clear and more detailed vaping information.
In addition, it comes with an input keyboard that provides password protection to unlock the device.
With the IP67 waterproof functions, it can withstand water immersion between 15 cm and 1 meter for 30 minutes.
And it's also dustproof (IP67) and shockproof to prevent dust ingress and accidental drop.
MAG P3 still adopts the exquisite small fire key, which makes you feel comfortable when you touch and press the button. And the TFV16 series coils will give you a different vaping experience. It provides multiple protections to ensure the safety of vaping.
|Battery type||2*18650 Cells(not included)|
|Power Range||1W-230W (VW)/ 10-230W (TC)|
|Resistance Range:||0.1Ω-2.5Ω (VW) / 0.05Ω-2Ω (TC)|
|Color||Black Red, Green Black, Grey Black, Red Black, Blue Black|
Constructed with a backside beautiful carbon fiber panel which manifests a high level of craftsmanship
Following the style of the Mag series, MAG P3 still adopts the exquisite small fire key, like the trigger of a gun, and you can press the triggering button easily. Most importantly, the surface of the key is fairly smooth, which makes you feel comfortable when your finger pulp touches and presses the button.
Powered by two 18650 batteries with the 230W max output power
How to replace with batteries
1. Press the “push ”button to open the battery cover as shown.
2. Place two 18650 batteries into the device according to the correct directions.
3. Close the battery cover
Slide-to-unlock functionality just like a phone，
In the case of a screen lock, move the arrow to the right, and the screen can be unlocked. Press the fire key to start vaping.
Note: Locking the fire key will lock the touch function simultaneously. You need to perform the slide-to-unlock to unlock the touch function to use the touch function again
1.8A QUICK CHARGING
The USB port is placed at the backside of the device. Charge the device by connecting it to a computer or a wall charger (DC 5V 1.8A) via the included USB cable. When it is fully charged the indicator will be off.
Powered by the advanced IQ-M Chipset
MAG P3 is driven by the advanced IQ-M Chipset that delivers a fire-new user interface and user experiences. With the 32-bit processor, it can power up to 230 watts and offer a flash fire speed up to 0.001s, allowing users to enjoy carefree vaping pleasures. MAG P3 is safer, faster and more stable.
Puff setting includes adjustment of the max puff number, puff numbers you have taken, and puff counter clearing function
System setting is divided into four parts which are general settings and chip information and theme settings and passcode settings
“VW Mode” includes vaping effects（SOFT/NORM/HARD）and wattage adjustment（1w~230w）
“TC Mode” includes coil types, the adjustment of preheat wattage and TCR values.
"VW Mode" includes vaping effects（Soft/Norm/Hard）and wattage adjustment （1Q~230W）
Once you choose “yes” to start using the passcode, you will need to enter your passcode each time you turn on the mod, and if you choose “no”, you do not need the passcode on the startup
Select “yes” to change your passcode. First, enter the old four-digit passcode and then enter a new four-digit passcode
If you forget your passcode In case you forget your passcode, there are two questions you need to answer for getting them back
IP67 waterproof, dustproof (IP67) and shockproof functions
MAG P3 is IP67 waterproof that can withstand water immersion between 15 cm and 1 meter for 30 minutes. And it's also dustproof (IP67) and shockproof to prevent dust ingress and accidental drop.
Multiple Protections: Short Circuit Protection, Overheating Protection, Low-Battery Warning, 10 Seconds Cut-off, Puff Monitoring System, Intelligent Atomizer Recognition
1.9'' highly-responsive touch screen
9ml largest E-juice capacity & Easy top refilling design
A newly developed bulb pyrex glass tube with the largest 9ml e-liquid capacity guarantees durable vaping enjoyment, as there is no need to add e-liquid frequently
Top cap gasket avoid E-juice leakage
16mm resin drip tip perfectly in your mouth
The upgraded airflow system enables the TFV16 tank to provide more desirable vaping effects. The two slots have been widened to help bring more air in and produce huge vapor. The specially made resin drip is 16mm in diameter and fits perfectly in your mouth. It adopts food-grade resin material processing unique multicolored fluid pattern and excellent tactility. Meanwhile, it will bring you increased airflow and a powerful draw effect. It is easy to install the drip tip with just a simple press.
Locking press button and airflow system
TVV16 tank has a locking press button on the top cap which can guarantee the safe use of the tank, and can also effectively avoid accidental leakage of e-liquid if opening the top cap accidentally
A brand new honeycomb structured mesh design is applied to the powerful TFV 16 tank. The mesh coil is made of nickel chrome and consists of multiple structurally stable hexagons that enable the mesh wire heating elements to heat more quickly and evenly. Every drop of the e-liquid can be fully heated through these small holes， obtaining more exquisite atomization and restoring the original flavor or juice.
How to fill vape juice
1. Hold the tank with one hand, and use another one to press the button, and then move it counterclockwise.
2. Add e-liquid through the slot, and pay attention not to drip it into the central airflow tube.
3. Close the cap carefully and firmly. Then let it stand for several minutes to get the cotton completely saturated
1 x SMOK MAG P3 Mod
1 x SMOK TFV16 Tank (9ml)
1 x SMOK TFV16 Conical Mesh 0.2Ω Coil Powered by nexMesh (Pre-installed)
1 x SMOK TFV16 Dual Mesh 0.12Ω Coil
1 x Bulb Glass Protective Silicone Sleeve
1 x Glass Tube Replacement
1 x USB Cable
● 1 x User Manual
● Spare parts
E-juice and battery are not included.
Battery using notice: Make sure to charge in or on a fire-proof surface. Don't leave charging batteries unattended. Please have fundamental knowledge about the batteries you are using and how to make use of them correctly.
90 Days warranty period for SMOK MAG P3 Vape Kit.
For "Dead on Arrival " (DOA) claims, please kindly report to us within 72 hours of the delivery time.
Please contact us first before you leave a review, we will help you to deal with your problem In time
No posts found