Buyecigkits.com would like to share the review on VOOPOO VINCI E-cigarette Pod Starter Kits ,you could visit https://www.buyecigkits.com/e-cig-kits/e-cig-pod-kit/original-voopoo-vinci-mod-pod-system-starter-vw-kit-1500mah-free-shipping/ if you want to buy VOOPOO VINCI E-cigarette Pod Starter Kits.
VOOPOO VINCI pod starter kits come with the cuboid shape design, the whole body is mainly black, and the side is equipped with small square pattern. “VOOPOO VINCI” is printed on the front of the device.
The front of the VOOPOO VINCI comes with 3 buttons and a small visual screen where the vaping time, mode, and suction recording can be visually seen.
The top button comes with a round design that blends in with the overall cuboid design. The circular button can be turned on and off 5 times to realize the switch. Besides, you could switch to the three modes of button ignition, auto-ignition and dual-ignition just pressing 3 times quickly.
The vertical bar button is below the visualization screen that can be pressed to enter the PUFF interface. On this interface, the vaper can see the number of suction ports during the last 14 days and the number of specific suction ports on a certain day. With the round button, you can unlock, lock, time, and other conditions.
VOOPOO VINCI E-cigarette Pod Starter Kits consists of two parts: the pod cartridge and the main device. The pod is made of PCTG. The name of the main device is VINCIR, which is made of zinc alloy and comes with a built-in 1500 mAh lithium battery. The led indicators turn green when the battery is more than 60 %, the indicators turn blue when the battery is between 60%, red light indicates that the battery is less than 20%.
The charging interface uses a Micro-USB interface, which can achieve a 5V/1A charging mode, which can be fully charged in about one and a half hours.
The airway adopts the dual-core dual airway mode, built-in GENE.AI chip, it has the ability of intelligent anti-burning core, and can carry out intelligent detection of different coils with 0.3Ω and 0.8Ω.
Short press the power button 3 times to intelligently switch between manual/pneumatic mode, with dual ignition (A & P) mode, manual (P) mode and pneumatic (AUTO) mode.
Its size is 104*25.3*25.3mm, which is small in size and easy to carry around.
The drip tip comes with a flat design that resembles a vaper's filter and is ergonomically designed.
A magnetic-type fitting method is adopted between the cartridge and the VINCIR, and its capacity is 5.5 ml. Thanks to the transparent pod, you could get out how much the e-juice remains.
When refilling the ejuice, open the silicone plug and refill the ejuice into the pod cartridge. Let it standstill for about 5 minutes.
The VOOPOO VINCI E-cigarette Pod Starter Kits has four metal contacts on the outside and three spring-loaded metal contacts in the middle. The body features seven protection functions including smoking timeout, atomizer short circuit, load overcurrent, battery overcharge, and power upper limit.
As mentioned earlier, the VOOPOO VINCI E-cigarette Pod Starter Kits adopts a double-core and double airway design, so it comes with two coils of 0.3Ω and 0.8Ω, which can provide more suitable analysis for e-liquid and nicotine salt. The Mesh core PnP-VM1 uses the atmospheric airway (recommended) and small airways for the conventional e-juice, while the Mesh core PnP-R1 uses the small airway for the nicotine salt e-liquid.
No posts found
THE PRODUCTS AND SERVICES ON THIS WEBSITE ARE INTENDED FOR ADULTS ONLY.
By entering this website, you certify that you are of legal smoking age in the state in which you reside